Ok, lets see the formula: 200 steps * 16 microsteps * 2 turns per inch = 6400 steps per inch Additional Information: 14798 Additional Information: hallo i have cnc with ball screw 2.5mm of pith.n driver stepping 1/16 how to setup step value Additional Information: i have ball screw with 2.5 mm of pith n 1 start motor 200 step 1/16 driver stepping Respond: Simply multiple the number of turns per inch and the number of steps per revolution and you will get the steps per inch. This will be the number of full steps that you motor produces (typically 200, or 1.8 degrees per step) multiplied by the microstepping per step to which the driver is configured. Now that we know this, we can get the number of steps per inch as described in the previous question: take the number of steps per revolution that the motor will output. For example, 10 TPI with 5 starts is 10 / 5 = 2 turns per inch. If there is multiple starts, then the number of starts is divided by the TPI to determine the turns per inch. If there is only a single start (typical all thread screws), then the turns per inch is the same as TPI (threads per inch). You will first need to derive the number of turns per inch that your lead screw produces. How do you calibrate steps per inch using Mach3 and a 1/2x13 lead screw Current Solution
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |